Logic Design for VLSI Engineers

Aspire to make a career in the VLSI industry? Then this is the right course for you. Designed by the leading minds of the industry, it will help you master the design, simulation, verification, and optimization of electronic circuit designs.

The techniques taught here will also help you in other BLP courses, such as RTL Design using Verilog HDL and Fundamentals of Static Timing Analysis.

What is the objective of this course?
This course will introduce you to essential design and optimization techniques applied to electronic circuit engines. It will also act as a complementary subject to Logic Design Theory, which is normally covered in undergraduate courses.

By the end of this course, you will be well-versed with the design, simulation, and verification of electronic circuits.

Combinational and Sequential Circuit Design techniques

Timing parameters for digital logic gates and flip-flops

Glitches and hazards in combinational circuits

Combinational circuit design techniques

Sequential circuit design techniques

Finite State Machines (FSM)

Introduction to Memories

How do I get a receipt after purchasing a course?

If you purchased a course directly through the platform as a retail user, a receipt for your order will be sent directly to the e-mail address you registered with.

If you received a token to enroll into a course through your organization/college, please contact your college for receipt details. No individual receipts are provided for such purchases

I purchased a course on the platform. How do I start accessing the e-Learning?

You will receive a token number (via e-mail for direct purchase on the platform or through your college/institutions IEEE-BLP program coordinator). Enter the token number on your dashboard on the IEEE BLP platform (after signing in at blended-learning.ieee.org ). You will be successfully enrolled to the course once the platform accepts the token as valid. Click on the Play button for the course on the dashboard to launch the e-Learning program or to perform other activities associated with the course. If you have trouble enrolling for courses, please send an e-mail to support-blp@ieee.org.

I am a faculty at a college and would like to enroll my students for the IEEE Blended Learning Program. How do I do this?

Please contact our sales team at support-blp@ieee.org.

How long do I have access to the courses after successful enrollment (token number accepted by the platform)?

E-Learning access: Three months from the time you enter a valid token number on the platform or until you complete the lab session whichever comes later. The entire program (e-Learning, Lab, and end-of-course assessment) must be completed within 6 months of purchase.

How can I extend access to the e-Learning course beyond the end date?

Please send us an e-mail at support-blp@ieee.org. You may be granted extension upon the sole discretion of the IEEE BLP Program administrator under exceptional circumstances.

I purchased and enrolled into a course but I am not able to continue. Can I get a refund?

Please refer to the course refund policy. You can write us at support-blp@ieee.org

Where can I find instructions to navigate e-Learning?

Navigation Guides:If you have purchased a course from us, you would have received a ‘Getting started version of the Learner Navigation Guide’ from our support team. If you did not, please contact us at support-blp@ieee.org and we will be happy to share one. Help Lecture:If you are having trouble navigating the e-Learning, please click on the ‘Help Lecture’ (represented by a question mark symbol) present on every e-Learning slide.

I entered my course token and the platform shows that my token number is invalid.

Please double check to make sure that you have entered the correct token number. If you received the token number from your college/university administrator, please contact them to ensure that the same token number has not been shared with someone else previously. If you purchased the course directly on the platform, please send an e-mail request to support-blp@ieee.org for further help.

How do I access all the courses I have purchased/enrolled for?

After purchasing the course you must activate it before using it. Your learner dashboard shows all the courses you are enrolled for. If you have enrolled for more than two courses, sign-in with your credentials and click on the arrow symbol to browse through all your courses.

Can I download courses and complete them at my leisure?

The e-Learning part of the IEEE Blended Learning Program is specifically designed to be an interactive online course accessed through a web-browser interface. You would need access to a computer with appropriate configuration, an Internet connection, and appropriately configured audio. System requirements are provided in the program details page.

Will my assessment results be saved if the Internet connection is lost during the session?

If you were in the middle of the assessment section, you will be asked to begin assessment again. Only the first, fully completed assessment results will be stored in the system for future retrieval.

What happens when there is power interruption or the Internet connection is lost in the middle of the course?

When you resume e-Learning, you will have an option to begin from where you last left off. However, you will have to sign-in and re-launch the specific e-Learning course.

I cannot listen to the audio/there is inconsistency and drag in the audio. How can I fix this issue?

Please make sure that the audio on your computer is configured properly, has Internet connectivity, and other system requirements are met. If you are still facing an issue after checking your computers audio configuration, please send e-mail to support-blp@ieee.org.

The audio is too fast/slow for me. I am unable to listen to all concepts in one take. How can I fix this issue?

You can control the audio playback in several ways. First, you can pause and resume the audio playback using audio controls available on the screen. You can also play audio from specific places within the page. Each page also includes a transcript of the audio to allow you to follow the audio more easily.

I am having several technical issues while browsing the e-Learning. Whom do I contact?

Please send e-mail describing, in detail, the issues you are facing along with your system details to support-blp@ieee.org. Please include the following information: Your system configuration (OS with version, RAM etc.) Browser and its version Nature of the issues including any screenshots

Why is the Course Feedback link not enabled in my Course Details page?

The Course Feedback link will be enabled only after 100% of both e-Learning and the lab sessions are completed. Please feel free to send specific feedback to feedback-blp@ieee.org

I have completed the program but unable to download the certificate.

Certificate link will be enabled once you submit the feedback form. It is mandatory to complete the program 100% to get the certificate.

Reviews

There are no reviews yet.

Be the first to review “Logic Design for VLSI Engineers”

Logic Design for VLSI Engineers

What Will You Learn?

Reviews

Associated Courses

Payment :

Related Products

Company

Platform

Subscribe

Logic Design for VLSI Engineers

What Will You Learn?

Reviews

Associated Courses

Payment :

Related Products

Related products

ASIC Design Flow

Static Timing Analysis for VLSI Engineers

RTL Verification using Verilog

Advanced Verification using System Verilog – Corporates Only

Company

Platform

Subscribe